For over six decades now, Harman Kardon has been known for the manufacture of stylish portable Bluetooth speakers. The modern speakers come equipped with long-lasting battery life with an aesthetically pleasing design. To top it up, Harman Kardon speakers are portable and produce a high-quality sound so that you can enjoy your music anywhere.
The unique and simplistic design of the Harman Kardon wireless speakers makes it stand out from its peers. Unlike other premium speakers, they come in different shapes and colors to fit your décor. But have you ever wondered how you could reset your Harman Kardon Bluetooth speaker? If yes, worry no more, in this article, I will show you how to do it.
How Do I Reset My Harman Kardon Bluetooth Speaker?
So, how do I reset my Harman Kardon Bluetooth speaker? To reset, you press and hold the ‘Reset’ Button for five seconds. The ‘reset’ button will be located at different locations on your speaker, depending on your speaker mode.
The position of the reset button will vary from one model to the other. For example, for Citation one and Citation 100 models, the reset button is located at the bottom of the speaker. It is clearly labeled ‘reset.’ To reset, you press and hold the button for five seconds. The speaker will shut off afterward and come on again automatically.
For Citation 300 and 500 models, the reset button is situated right next to the power button and the service buttons. The reset process is the same. Simply long-press the ‘reset’ button for about five seconds. This will shut down the speaker and come back up again.
The Citation bar is another unique Bluetooth speaker from Harmon Kardon. For this model, the reset button is located on the touchscreen surface of the speaker. Here, to reset, you will press the reset button and go to factory reset. Then follow the usual procedure after that by pressing the reset button for five seconds. This will restart the soundbar, and all settings will be deleted.
Another unique model is the Citation Surround. You can easily reset this one by pressing the ‘reset’ button on the speaker’s back for five seconds. After that, the speaker restarts itself. Once it is on, you can go ahead and configure it with your preferred settings.
The Citation Sub, reset button is located next to the LED indicator on the backside. While for the Citation multibeam, it is found right next to the USB and AUX ports. To rest these two speakers, you simply press the ‘reset’ button for five seconds. Like the other models, this will restart the speaker, allowing you to pair your devices and enjoy your music.
Guide to reset your Harman Kardon Bluetooth Speakers
Every speaker brand has its unique design. Furthermore, the models within the same brand may have different designs and positioning of the reset button. But all these will eventually lead to the same action when pressed.
Follow these steps to reset your Harmon Kardon Bluetooth speaker (any model):
• First, make sure your speaker is turned on.
• Ensure that all devices that were initially paired to your speaker are unplugged. Delete the speaker from your iOS or Android settings by selecting your speaker model name on the Bluetooth list and clicking “Forget device.”
• To reset the speaker, press and hold the reset button for 5 seconds. For other models, you will have to press and hold the Bluetooth and power button simultaneously. Some will use a combination of the Bluetooth button and the volume up (+) button.
• This will restore factory settings for your Harman Kardon Bluetooth speaker and will be ready to pair with your device when it is turned back on.
Resetting Harman Kardon Bluetooth Speaker
These are the steps to reset most of the Harman Kardon Bluetooth speakers, e.g., ONYX Studio Wireless:
• First, confirm that the speaker is on. To do this, check the LED indicator.
• Next, hold power and volume buttons for 5 to 10 seconds.
• The speaker will beep briefly and then turn off.
• Some models will turn back on automatically, while some will require you to turn them back on manually.
• When you turn on the speaker, the LED light will blink, indicating that it is in pairing mode and that the speaker configuration has been set to default settings.
• Pair your device and enjoy your music.
Frequently Asked Questions
1. Will resetting my Bluetooth speaker fix the problem it has?
A Bluetooth link or pairing can fail because of a hardware or software problem. Bluetooth connections can fail for a variety of reasons, but the majority of them are easily repairable. Yes, resetting your speaker allows your device to pair afresh, hence eliminating the issues that may cause it to fail to pair.
2. Will resetting my Harman Kardon speaker reduce its life?
No. This is a myth that has been going around for a while. The life of your speaker is affected by many other factors. How you take care of your device will determine how long it stays. But the battery life or physical status of your device is not in any way affected by the number of times your device is reset.
3. How can I reset my Harman Kardon Onyx Studio 2?
You can do this by pressing and holding the Bluetooth button for 3 to 5 seconds. Your speaker will restart, and the LED will start blinking to indicate that it is ready for pairing. At this time, you can check for the availability of the speaker on your device and pair.
4. How do I reset my HK Kardon Onyx Studio 4?
First, ensure that your device is on before resetting. Next, press and hold down the Bluetooth button with volume up (+) button. Do this until your speaker turns off. Switch it back. Your speaker will now be ready for pairing. Search for the speaker on your device’s list of available Bluetooth devices. Select the HK Onyx Studio 4 speaker and pair your device. You should now be able to enjoy your music.
5. How do you put a Harman Kardon speaker in pairing mode?
First, you turn your Bluetooth device on, e.g., iPhone, laptop, or tablet. Then turn your Harman Kardon speaker on using the right-side button. Push the left side of the speaker to turn on Bluetooth. Once the Bluetooth connection is visible, connect your device. Ensure your hone is in close range to your speaker. Physical or electronic obstruction will affect the quality of the Bluetooth connection. The LED on your speaker will blink when it is connected.
6. How do I know if my Harman Kardon Bluetooth speaker is charging?
First, you have to plug your speaker into the charger using the standard branded micro-USB cable. Switch on your speaker by pressing the power button. When it is on, the LED light will turn on. Once the charger is connected, the LED will start flashing until the battery is fully charged.
7. How do I reset my Harmon Kardon Citation 1?
Ensure that your speaker is on. Next, press the RESET button located at the bottom of your Citation 1 speaker for five seconds. This will restore the factory settings of your speaker. Once it has reset, your speaker will automatically power off and on again. Once it is on, your speaker will be ready for pairing. This will be indicated by the blinking LED in front of the speaker.
8. How can I reset a Harman Kardon mini?
Confirm that your HK mini speaker is on first before resetting. Next, press the volume up (+) button and the Play/Pause Button simultaneously for three – five seconds. When you see all the speaker LED lights are on, release the buttons. Allow the device some time to restart. The LED will start blinking, indicating that the speaker is ready for pairing. You can now connect it to your desired device.
Despite the unique premium design and sound quality, Harman Kardon’s Bluetooth speakers are more affordable than other brands. Whether you are looking for a simple portable speaker or a sophisticated home theatre system, Harman Kardon has got your back.
The consistency in the design of Harman Kardon Speakers makes it easy for you to locate specific features like the reset button. Knowing how to reset your speaker will come in handy, mainly when your speaker develops some problems or just wants to restore the factory settings.
Bluetooth speakers are becoming the most popular way to listen to music and have a good time. Bluetooth technology has dramatically helped to provide a stable and secure network technology for a wide variety of devices, including phones, laptops, tablets, and PCs. However, just like every technology has advantages and disadvantages, not every electronic device will work efficiently.
Even though almost all Harman Kardon Bluetooth speakers come with a detailed user manual, it can be very confusing at times. This article will help you know how to quickly reset your Harman Kardon Bluetooth speaker and pair it to your device.