Galaxy Buds Not Charging [Solutions In Seconds!]

If you’ve been experiencing problems with charging your Galaxy Buds, you’re not alone. 

Many users have reported that their buds won’t charge or will only partially charge; here’s a possible reason why.

Why Are My Galaxy Buds Not Charging?

Your Galaxy Buds may not be charging because of an issue with your charging cable or another connection between your device and the power source or your Galaxy buds may be overheated or even too cold to charge.

 First, the quality of your charging cable can have an effect on how quickly and efficiently your buds will charge.

If you use a lower-quality or damaged cable, you may find that it doesn’t deliver enough power to fully charge your buds in a timely manner. 

Additionally, there may be issues with the connection between your device and these cables, which can also interfere with charging. 

Another important factor to consider is the ambient temperature around your buds while they are charging. 

If they become too hot or cold, this can degrade their charging capacity and cause them to lose charge more quickly than normal. 

By understanding the factors that affect how your buds charge, you can take steps to ensure that they always have sufficient power for all of your listening needs.

In this blog post, we’ll take a look at some of the possible reasons for this and offer some suggestions on how to fix the problem. Keep reading to learn more.

Common Reasons Why Your Galaxy Buds Are Not Charging

There are several possible reasons why your Galaxy Buds might not be charging properly.

One possible cause is that your charging cable may not be fully plugged into both the speaker and the charger.

It’s important to ensure that the cable is properly connected on both ends, as otherwise, it will not provide a solid connection for the power source to travel through. 

Another reason why your Galaxy Buds may not be charging could be that there is debris or dust lodged in the charging port, keeping the power from reaching your buds. 

Finally, it’s possible that your charger has a malfunctioning component, such as a faulty wire or unresponsive chip. 

In any case, these issues can usually be easily resolved by taking some simple steps such as cleaning out the charging port, replacing the cable or charger completely, or performing a quick repair on damaged components. 

So if you’re having trouble getting your Galaxy Buds to charge properly, don’t panic; just take a moment to troubleshoot and find the source of the problem so you can get back to enjoying your wireless earbuds!

How To Reset Your Galaxy Buds

If you want to reset your Galaxy Buds, there are a few different ways to do it.

If you’re having trouble with your Buds, a reset may fix the issue. 

You can also use a reset if you’re selling your Buds or giving them to someone else.

A reset will erase all personalized settings from your Buds, so make sure to back up any data you want to keep before you reset them.

There are three ways to reset your Galaxy Buds: through the Galaxy Wearable app, through the Buds’ touch-sensitive controls, or by using a paperclip. 

We’ll go over all three methods so you can choose the one that works best for you.

To reset your Buds through the Galaxy Wearable app, open the app and select the “About earbuds” option.

Then, tap the “Reset earbuds” button and confirm that you want to reset your Buds.

To reset your Buds through the touch-sensitive controls, put your Buds in their charging case and make sure that the case is charged. 

Then, press and hold the touchpad on both Buds for 7 seconds until you hear a voice prompt saying “Resetting,” followed by a beep.

To reset your Buds using a paperclip, open the charging case and look for the reset button inside on one side. 

Note that this should only be used as a last resort if none of the other methods are working. 

To use the paperclip method, insert a thin pin into the hole to press and hold the reset button for 5 seconds. 

The Buds will give a confirmation beep and say “Resetting” when they have been successfully reset.

How To Charge Your Galaxy Buds With A Different USB Cable

It’s important to make sure that you are using the proper cable to charge your Galaxy Buds, as using an incompatible cable can damage your Buds or prevent them from charging properly.

The official Samsung Galaxy Buds charging cable is a USB Type-C to USB Type-A cable, which means that one end of the cable plugs into a standard USB port, while the other end plugs into the Type-C charging port on the back of the Buds case.

If you need to use a different cable to charge your Buds, make sure that it is also a USB Type-C to USB Type-A cable.

You should avoid using any other type of cable, as they can potentially damage your Buds.

In particular, you should avoid using a USB Type-C cable without the proper adapter, as this can cause problems with your Buds’ compatibility.

If you already have a USB Type-C cable, but it’s not the correct type, don’t worry; Samsung also makes a convenient adapter that will solve your issue. 

You can buy an official Samsung adapter online or at any major electronics retailer, and using it will allow you to charge your Buds with any standard USB Type-C cable.

How To Check The Battery Status Of Your Galaxy Buds

There are a few different ways to check the battery status of your Galaxy Buds. 

The easiest way is to open the Galaxy Wearable app and select the “Battery” option; this will give you a detailed breakdown of the battery life of both your Buds and their charging case.

You can also check the battery status of your Buds by opening the case while they are connected to your phone; a pop-up window will appear on your screen, showing you the current battery levels of both your Buds and their case.

Finally, you can check the battery status of your Buds by double-tapping the touchpad on either earbud; a voice prompt will tell you the current battery level of that Bud.

How To Connect Your Galaxy Buds To A Different Device

If you want to connect your Galaxy Buds to a different device, there are a few different ways to do it.

The easiest way is to open the Galaxy Wearable app and select the “Connections” option; from here, you can select the device you want to connect to from the list of available devices.

You can also connect your Buds to a different device by opening the charging case while they are connected to your phone; a pop-up window will appear on your screen, showing you the connection menu. 

You can use this menu to disconnect or reconnect your Buds.

Finally, you can connect your Buds to a different device by opening the charging case while they are connected to your phone and then double-pressing the touchpad of either earbud; this will open the connection menu, which you can use to select the desired device.

How To Check For Software Updates For Your Galaxy Buds

It’s important to keep your Galaxy Buds up-to-date with the latest software, as this can help improve their performance and fix any bugs that might be present. 

The Galaxy Wearable app will automatically check for any available updates whenever you open it, but you can manually check for them by following the steps below.

Open the Galaxy Wearable app and select “Device Settings.” From here, scroll down to “General,” then select “About Devices.” Select “Check Updates” to see if there is a new software update available for your Buds.

Suppose there is an update available; select “Download” to download and install it.